Page 30
2008 Portable Spa Owner’s Manual
LTR20081000, Rev. E
Cleaning and Maintenance
Draining Your Portable Spa
Your spa should be drained every four to six months, and refilled
with fresh tap water. The following is the recommended method
for draining your spa.
Turn off the power at the breaker.
1.
Remove all filters.
2.
If your drain valve is mounted on the side of the spa cabinet as
shown at right, proceed to step 5.
If your drain valve is located inside the spa cabinet:
Using a Phillips screwdriver, remove the screws to the
3.
access panel and open it.
Locate hose ending with the 3/4 inch hose-bib fixture.
4.
Hook up the female end of a garden hose to the drain fitting.
5.
Place the other end of the garden hose where you would like the water to drain to.
6.
Twist the hose-bib fixture counterclockwise and pull to open the drain.
7.
Let spa drain completely, then remove garden hose.
8.
Twist the hose-bib fixture clockwise to close it.
9.
Winterizing (Cold Climate Draining)
In many areas of the country, the temperature drops below 32˚F (0°C). We recommend that you always have your
spa full of water and running at normal spa temperatures (80˚F to 100˚F, 26.7°C to 37.8°C). This will help reduce
the risk of freezing in your spa and your spa’s equipment.
Warning: If you find the need to drain your spa, please be aware of the potential of freezing in your spas
equipment and plumbing . Even if the directions below are followed perfectly, there is no guarantee that
your spa will not suffer freeze damage .
Freeze damage is not covered by your warranty .
Open all filter covers.
1.
