2011 Portable Spa
LTR20111000, Rev. D
W
ater Clarity
www.calspas.com
30
Maintenance Schedule
Each time you refill the spa
Follow the section “Starting the Spa with Fresh Water” on page 9 .
Prior to each use
Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
Once a week
Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
If your water source is high in calcium, add stain and scale
preventer.
Once a month
Deep clean your spa’s filter. (Follow filter cleaning instruction at
beginning of this section)
Every two to four months
Drain and clean your spa with a multi-purpose cleaner for spas.
Polish the acrylic surface with a surface protectant for spas.
Clean and treat spa cover, pillows, and Cal Select cabinet (if
equipped) with a vinyl cleaner for spas.
Refill your spa, following the section “Starting the Spa with Fresh
Water” on page 9 .
If you are using the Cal Clarity II Automatic Bromine Generator, add
new sodium bromide to the water.
Once a year
Replace filter cartridges if the pleats appear frayed.
If you use an ozonator, you will need to replace the ozone
cartridge.
If you use the Cal Pure UV water sanitizer, you will need to replace
the UV lamp.
We recommend that your spa water be changed every 4 to 6 months. You may find the need to change your
spa water more frequently with heavy use. When empty, your spa should be cleaned with a non-abrasive
cleaner and then rinsed thoroughly.
