3.8 Troubleshooting
If your original lock does not lock correctly, this may be caused by the height of the CAL latch back-plate now positioned in your door jamb. In
order to correct the problem, simply remove the original door manufactures' latch and re-install with washers placed behind the original latch. The
wash¬ers will provide additional height for your original latch and correct the problem. Due to a variety of original locks from different suppliers,
washers are not included witlrtb^€Afc-Double-Bolt locking system.
3.9 Warranty
CAL products are manufactured to the highest standards of quality and workmanship. CAL warrants to the original purchaser that the CAL Double-
Bolt lock system will operate free of manufacturing defects for a period of five (10) years from the date of purchase. This warranty is valid to the
original purchaser only and excludes product damage from misuse, improper installation and abuse of any kind. The warranty does not cover
damage to finish cause by effects of weathering, scratching or use of improper lubrication or cleaning. In the event of a claim covered by this
warranty, the purchaser must provide in writing a description of the problem, a copy of the original purchase receipt along with your name, address
and daytime phone number. CAL will replace any defective part, for installation by the original purchaser. CAL will not be liable for labor charges,
damages to doors or surfaces or any incidental or consequential damage. Purchaser accepts responsibility for suitability for installation.
4.0 Service
The CAL lock surface and latch should be cleaned with mild detergent. Do not use abrasive cloths or cleaning agents as this may scratch the lock
surface. Dry with soft cloth. Do not allow locking pins to stay wet. Lubricate locking pins with light oil, silicone or lock lubricant.
