EVERSKY
™
MS-CDF-019
–
Manufacturing Nr: 22
0001→
Version B
Update: 2022/06/14
40/70
XV.
BACKUP / RESTORATION OF PARAMETERS
XV.1.
User settings
This function is particularly useful when commissioning and fine-tuning of the machine has been completed and it is desired to save
all user parameters so that they can be recalled later in the event of, for example, an unintentional change in parameters that causes
a malfunction of the control unit.
When leaving the factory, the user settings are identical to the factory settings. If the restoration of user parameters is called and no
prior backup has been made, the restored parameters will be the factory parameters.
Minimum access level:
Service
Path:
XV.2.
Factory settings
Unlike the user settings, the factory settings cannot be saved, and only the restore function is possible.
When the restore is called, all the settings changed by the user in the field are lost, and the controller restarts at the factory default
values. This is particularly useful in cases where unidentifiable user settings have been changed and saved with inappropriate values
making the machine unusable.
Minimum access level:
Service
Path:
Manual/Auto
Settings
Configuration
Access rights
Control temp
Control CO2
Control extra unit
Alarm settings
Restore factory
settings: No
Restore user
settings: No
Save user settings
No
Manual/Auto
Settings
Configuration
Access rights
Control temp
Control CO2
Control extra unit
Alarm settings
Restore factory
settings: No
Restore user
settings: No
