10/12/13
LMU-3000 Hardware & Installation Guide - PULS Wiki
https://puls.calamp.com/wiki/LMU-3000_Hardware_%26_Installation_Guide
20/33
4.5.3 Activating a CDMA LMU-3000™ – Bell Mobility
While the Bell Mobility network does support Over-The-Air activation processes like those used by Sprint or
Verizon Wireless, it requires that the user enter several menu choices in order to complete activation.
Unfortunately, this is something the LMU-3000™ does not support, so the activation must be performed
manually. Bell Mobility will provide you with a password to gain access to the network (ex: 8889).
The activation procedure will be as follows:
1. Power on the LMU-3000™.
2. Connect to the LMU-3000™ using HyperTerminal or PuTTY
3. Issue the following AT Command:
ATPASSTHRU
ATE1
AT$SPSPC=000000
AT+MNAM=,0,<MIN>,<MDN>,,,0,1000000,1,1,1,
ctrl C
4. Program in the network password using:
AT$APP PARAM 2315,0,”<Bell Password>”
5. Program in the network username using:
AT$APP PARAM 2314,0,”<Phone Number>@1x.bell.ca”
6. Verify the above settings with:
AT$APP PPP?
The LMU-3000™ should return the following:
PPP 0 USER <Phone Number>@1x.bell.ca *
PPP 0 PASSWORD <Bell Password> *
PPP 1 USER
PPP 1 PASSWORD
OK
Once configured, you may verify that the LMU-3000™’s modem has registered to the CDMA network.
Enter:
