Cal-Comp
10
Additional information
Troubleshooting
This section lists some problems that you might encounter while using your Headset.
The Headset Indicator Light Flashes Red
This indicates that the Headset is running on low battery and has limited talk time and
standby time left. Charge the Headset for approximately 1 to 1.5 hours.
No Sound Contact Between Headset and Other Device
In order for the Headset and the device you are using to recognize one another, they
ought to be paired.
Make sure the Headset and the device you are using with are no more than
10 m. /30 ft. apart, so they are within operable range.
No Indication of Charging is Shown
For the Headset battery that is empty, or has not been used for a long time, it may take
several minutes for the indicator to show charging status (a steady red light).
Guidelines for Safe and Efficient Use
Note:
Read this information before using your Bluetooth Headset.
Product Care and Maintenance
Please read the following to get the most out of your sophisticated Bluetooth Headset
about product care, safe and efficient use.
For any queries about any exceptions when using Bluetooth equipment, due to
national requirements or limitations, please visit www.bluetooth.com.
Product Care
•
Use of non-Cal-Comp original accessories may result in performance deterioration,
product damage, injury, or electronic shock, and warranty termination.
•
Do not attempt to disassemble your Headset, as it does not contain any components
serviceable or repairable by consumers.
•
Do not paint your product as the paint could prevent normal use.
•
Do not place the Headset in a dusty area, and only use soft cloth to clean your
