U
SER
’
S
G
UIDE
— 15
Memory Storage Keys (M0-M5)
In addition to the standard cumulative Memory (as described on
previous page), your calculator has six independent Storage
Registers — [M0] through [M5] — that can be used to permanently
store single, non-cumulative values. These values will be held when
your calculator is turned off, and will only clear when a “Clear All” is
performed (via
s x
).
You can replace a value in one of these Memory Registers by stor-
ing a new value in place of the stored value.
FUNCTION
KEYSTROKES
Store single value in M0
s ® 0
Store single value in M1
s ® 1
Store single value in M2-M5
s ® 2
,
3
,
4
, or
5
Clear register (e.g., M1)
0 s ® 1
Review stored value (e.g., M1)
® 1
Clear stored values*
s x
*Perform a
s x
(Clear All) with caution, as it will clear any stored values from your
calculator’s registers.
Example:
Store 175 into M1, recall the value, and store a new value in place
of the first stored value. Then clear M1.
KEYSTROKE
DISPLAY
1 7 5 s ® 1
M-1 175.00
O o
0.00
® 1
M-1 175.00
1 5 0 s ® 1
M-1 150.00
0 s ® 1
M-1 0.00
