12 —
M
achinist
c
alc™
P
ro
d
Diameter —
Enters a Diameter. Unitless entries
assumed Inches in U.S. mode; millimeters
in Metric mode. Calculates circle Area and
Circumference given entered Diameter. Calculates
Diameter given entered Radius.
g d
radius —
Enters or calculates a Radius.
Unitless
entries assumed Inches in U.S. mode; millimeters
in Metric mode.
Calculates Radius given entered
Diameter.
g 8
Alpha —
Enters alphabet character selection
mode. While in this mode, a letter can be selected
and used with
D
to enter a letter Drill Size.
Entering this mode with a unitless entry between 1
and 26 will display the corresponding letter of the
alphabet (i.e.
5 g 8
displays the letter
e
). While
in Alpha mode, presses of
8
or
+
toggle forward
through the alphabet, while presses of
-
toggle
backward.
a
Adjacent (x) —
Enters or calculates the Adjacent
(horizontal) leg of a right triangle. Calculates
Adjacent value given two other right-triangle
values. Also enters the Center x-coordinate of a
Bolt Pattern.
p
Opposite (y) —
Enters or calculates the Opposite
(vertical) leg or height of a right triangle. Calculates
Opposite value given two other right-triangle values.
Also enters the Center y-coordinate of a Bolt Pattern.
h
hypotenuse (r) —
Enters or calculates the
Hypotenuse (diagonal) of a right triangle.
Calculates Hypotenuse value given two other right-
triangle values.
(cont’d)
