U
ser
'
s
G
Uide
— 13
n
Angle (θ) —
Enters or calculates an Angle,
providing the Adjacent Angle for both instances.
Calculates an Angle given two other right-
triangle values. Also enters the Starting Angle
of the first hole of a Bolt Pattern, with 0° being
the three o’clock position and the rotation going
counterclockwise.
SETTINg FracTIONal rESOluTIONS
The
Machinist Calc Pro
is set to display fractional answers in
64ths of an Inch. All examples in this User’s Guide are based
on 1/64". However, you may select Fractional Resolution to
be displayed in other formats (e.g., 1/16", 1/32", etc.). The
methods for permanently and temporarily changing Fractional
Resolution are shown in the following sections.
Permanently Set fractional Resolution
To permanently set the Fractional Resolution, you must be in
Preference Setting mode.
KeySTROKe
DISPLAy
1. Access Preference Settings:
g S
(Prefs)
fRAC 0-1/64
INCH
*
2. Toggle through available Fractional Resolutions:
+
fRAC 0-1/2
INCH
+
fRAC 0-1/4
INCH
+
fRAC 0-1/8
INCH
+
fRAC 0-1/16
INCH
+
fRAC 0-1/32
INCH
+
(repeats options)
fRAC 0-1/64
INCH
(cont’d)