U
ser
'
s
G
Uide
— 33
* Repeated presses of
C
will toggle through the inputs and outputs,
starting with the entered Diameter.
FEED PEr TOOTH (cHIP lOaD)
Feed per Tooth, or Chip Load, is the thickness of material
removed by each cutting surface. You can calculate Feed per
Tooth given values for Number of Teeth and Cutting Feed.
If the Cutting Feed is not known, the Feed per Tooth can be
calculated given values for Number of Teeth, Feed Rate and
RPM (Spindle Speed).
feed per Tooth –
based on cutting Feed and # of Teeth
Calculate Feed per Tooth (Chip Load) with a Cutting Feed of
0.024 Inch for 4 Teeth:
KeySTROKe
DISPLAy
O O
0.
1. Enter the Cutting Feed:
. 0 2 4 c
CUT
$
0.024
INCH/ReV
2. Enter the Number of Teeth:
4 #
TeeTH
$
4.
3. Calculate the Feed per Tooth:
F
fPT 0.0060
INCH
F
TeeTH
$
4.
F
CUT
$
0.024
INCH/ReV