User's Guide — 23
Paperless Tape
The Paperless Tape allows the user to
display and review the last 20 entries
of a calculation. [Rcl] [=] accesses the
tape mode and [+] or [–] scrolls for-
ward or backward through the entries.
While in the Paperless Tape mode, the
display will show the entered or cal-
culated value, along with the sequence
number of entry (e.g.,
01
,
02
,
03
, etc.)
and the math operator (+, –, x, ÷, %)
in the upper left corner of the display.
If [=] has been used in the middle of a
string,
SUB
(for Subtotal) will display
in the upper left. If [=] was the last
operation performed, the display will
show
TTL
(Total) as the last entry.
Pressing any key other than [Off], [+]
or [–] exits the Paperless Tape mode.
The last entry made (or
TTL
) will be
displayed, allowing you to either exit
completely, or to continue using the
last tape value for another operation.
Note: The Paperless Tape is cleared
each time [On/C] is pressed twice, or
the unit is shut off.
