U
ser
'
s
G
Uide
— 37
* Repeated presses of
D
display the next larger Drill Sizes. The
+
and
-
keys will toggle forward and backward, respectively, through all
available Drill Sizes.
Inch Drill Size entry
Enter hole sizes of 0.3”, 1” and 1-19/64”. After entering each size,
toggle through the available sizes to view the next larger and next
smaller sizes.
KeYSTROKe
DISPLAY
O O
0.
1. Enter the 0.3” hole size and view next larger and next smaller
sizes:
. 3 i D
7_60
MM DRILL SIZe
0.2992
INCH
D
N
DRILL SIZe
0.3020
INCH
- -
19/64
DRILL SIZe
0.2969
INCH
2. Enter the 1” hole size and view next larger and next smaller
sizes:
1 i D
1
DRILL SIZe
1.0000
INCH
D
25_50
MM DRILL SIZe
1.0039
INCH
- -
63/64
DRILL SIZe
0.9844
INCH
3. Enter the 1-19/64” hole size and view next larger and next
smaller sizes:
1 i 1 9 / 6 4 D
19/64
DRILL SIZe
1.2969
INCH
*
D
33_00
MM
DRILL SIZe
1.2992
INCH
- -
9/32
DRILL SIZe
1.2813
INCH
*
* Note that even though the Drill Size is shown on the upper left of the
display without the whole inch value (e.g. 19/64 instead of 1-19/64),
the decimal inch equivalent reflects the actual size.
