38 — M
achinist
c
alc™
/ M
achinist
c
alc™
P
ro
Millimeter Drill Size entry
Enter a 5.7 mm hole size and toggle through the available sizes
to view the next larger and next smaller sizes:
KeYSTROKe
DISPLAY
O O
0.
1. Enter the hole size as millimeters:
5 . 7 m D
5_70
MM DRILL SIZe
0.2244
INCH
2. View next larger and next smaller sizes:
D
5_75
MM DRILL SIZe
0.2264
INCH
- -
2
DRILL SIZe
0.2210
INCH
DrIll POINT
(NOT AVAILABLE ON MODEL 4086)
The Drill Point function calculates the Drill Point Cut Depth
(length) of the stored Drill Size. By default, the calculation is
based on a Cutting Angle of 118°. If a different Angle is desired,
it can be stored using the Drill Point function (for example,
1 2 0 g D
stores 120°).
Find the Drill Point Cut Depth for a 1/2-Inch drill with a 118°
Cutting Angle. Then, find the Cut Depth using a 127° Angle.
KeYSTROKe
DISPLAY
O O
0.
1. Enter the Drill Size:
1 / 2 D
1/2
DRILL SIZe
0.5000
INCH
2. Enter 118° Angle and calculate the Drill Point Cut Depth:
1 1 8 g D
(Drill Point)
DePTH
DRILL
.
0.1502
INCH
D
ANGLe
DRILL
118.°
D
1/2
DRILL SIZe
0.5000
INCH
3. Enter 127° angle and calculate the Drill Point cut length:
1 2 7 g D
(Drill Point)
DePTH
DRILL
0.1246
INCH
