U
ser
'
s
G
Uide
— 41
KeYSTROKe
DISPLAY
O O
0.
1. Enter the Thread Size:
8 t
SIZe
8 –
2. Toggle through the common TPI values:
t
THReD
SIZe
8 – 32
t
THReD
SIZe
8 – 36
t
THReD
SIZe
8 – 32
3. Clear the display and then recall the stored Thread Size:
O
*
0.
t
THReD
SIZe
8 – 32
4. Find the recommended Cutting Tap Hole Size (Cut Tap Drill
Size) and the Thread Outside Diameter (Minimum Major
Diameter):
t
(Cut Tap Drill Size)
TAP
DRILL SIZe
29
t
(Outside Diameter)
OD
SIZe
0.1640
INCH
* In addition to clearing the display, pressing
O
upon reaching the
desired TPI stores the displayed Thread Size.
You can also directly enter a Thread per Inch value instead of
toggling through the available ones. For this example, enter a
number 6 screw with 32 TPI and toggle through the available
Thread characteristics.
KeYSTROKe
DISPLAY
O O
0.
1. Enter the Thread Size:
6 t
SIZe
6 –
2. Enter the TPI and store the final Thread Size:
3 2 t
*
THReD
SIZe
6 – 32
(cont'd)