Delta Percent
The Delta Percent function finds the
percent change between two values.
The
[=]
key must be pressed to com-
plete the calculation.
10
[Conv] [%] 15 [=]
50.
100 [Conv] [%] 25 [=] – 75.
Memory Functions
The
NautiCalc Plus
allows you to store,
add, subtract, replace and recall up to 10
separate Memory values. Memory values
do not change unless revised or the cal-
culator is reset. Values can be stored in
any format.
Note:
Memories 1– 9 store a single
value, while Memory “0” maintains a
cumulative total. When adding to Memory
“0,” only values of the same convention
(i.e., time, distance, etc.) may be added.
Otherwise, enter values with no format.
User’s Guide – 13
