Using the
Stopwatch/Timer
NautiCalc Plus
includes a stopwatch
timer with buzzer and split/ lap functions.
When activated, the timer can count up
from zero or down from an entered time.
The display accuracy can be set to show
zero to two decimal points (00:00:00,
00:00:00.0, 00:00:00.00).
While the timer is counting, a clock symbol
(
❹
) flashes at the bottom of the display. A
star (
.
) symbol appears if the timer buzzer
is set to “On.” Timer values can be used in
calculations or stored in Memory.
Note:
The display accuracy and timer
buzzer can be set via the Preference function.
[Timer]
Displays, activates, and stops the
timer. If a value is entered prior to
activating the timer, the timer acts as
a countdown timer.
[S/Lap]
Freezes the display. Once the display is
frozen, the value displayed may be
saved in Memory by pressing
[Stor]
then the register number. e.g.,
[Stor] 1
.
Note:
Pressing the
[Off]
key twice stops
and exits the stopwatch timer. Press
[On/C]
to reset the display.
38 – NautiCalc Plus
™
