[Conv] [+] — Pi (
π
)
Internal constant = 3.141593.
[Conv] [–] — Change Sign Function
Toggles th e sign of a value between
positive and negative values.
[Rcl] [=] — Paperless Tape Feature
Accesses the paperless tape mode. See
the “
Paperless Tape
” section for more
information.
[Rcl] [x] — Metric Mode Toggle
Toggles between Imperial and Metric
defaults for the weight per volume fac-
tor and the weight key. When you are
in Metric Mode, any value in meters
will be limited to three decimal places
to the right. To verify which mode you
are in, do an all clear (
[Conv] [x]
), then
press
[Rcl] [Weight]
. If the displayed unit
of measurement is kilograms, you are
in Metric Mode. If the displayed unit is
tons, you are in Imperial Mode.
[Conv] [•] — Per Unit Function
Used to calculate total material cost, if
you multiply the total amount of mate-
rial by the per unit cost of the item. For
example, to find the cost of 39.7 square
yards of carpet at $11.75 per square
yard, enter
39.7 [Sq] [Yds] [x] 11.75
[Conv] [•]
which will give you $466.48.
User’s Guide – 9
