15
is displayed for the duration of Programming Mode. At the end of the
programmed cook time, the appropriate element will turn "off" and three long
beeps lasting ½ second "on" ½ second "off" will be heard; the “ON” LED will
flash for five seconds and the appropriate display will show “0” to indicate
which burner turned off and to return the unit to programming mode.
Each and every element can be individually programmed with the timer, each
one having its own time settings and all can run simultaneously.
NOTE:
The small dot on the bottom right of the digit displaying the cooking
level of the selected element will illuminate to indicate that the burner is being
timed.
d.
Adjusting or canceling a programmed Cook tim
e:
At anytime
during programming of an element (while the “ON” LED flashes), the timer
can be adjusted to a new time. To adjust or cancel the Cook time of an active
element, select the element to be adjusted
, the timer display will show the
remaining cooking time, then select Timer by touching the Timer key
, then
adjust time using the number keys. To turn the timer off, select “0” twice.
Bringing the cook time to zero cancels the timer for the selected element (this
does not turn the burner off, just the timer for the burner).
e.
Remembering a programmed Cook tim
e:
To view the remaining
cook time of a particular element, just touch the "on" key
of the element.
The remaining cook time is displayed for the 10-second duration of the Initial
Programming mode (while the 'ON" key LED is flashing). If no time is set for
a particular element, the display will go blank during the 10-second period.
f.
Timed Fan
:
At any time during programming of the fan (while the fan LED
flashes and the Fan level is set), the timer can be set to establish the automatic
fan "off" time. The fan time can be programmed, adjusted, viewed and
cancelled using the same set of rules as the burner cook time. At the end of the
programmed fan time, the fan will turn "off", three long beeps lasting ½ second
"on" ½ second "off" will be heard. NOTE: If a Downdraft is connected to the
cooktop the Downdraft will not automatically lower when the Fan
programmed time elapses.
g.
Stand-alone Timer
:
The Timer can be used alone as a reminder. The
stand-alone Timer has no effect on the elements or on the fan. For the stand-
alone timer to be set, neither elements nor the fan should be in Programming
Mode. To set the Timer, touch the Timer key
, then set the desired time,
using the number keys. The Stand-alone Timer is displayed on a continuous
basis, except during programming of an element or of the fan. At the end of the
programmed time, three long beeps lasting ½ second "on" ½ second "off" will
be heard. The Stand-alone Timer can be adjusted or cancelled. To adjust or
cancel the Timer, touch the Timer key, then change the Timer settings by using
the number keys. Bringing the time to '00' cancels the timer.
h.
Instant-off/Lock and the Timer
: The timer is affected by Instant-
off/Lock. When the Lock key is touched while elements are ‘on’,
Summary of Contents for SMt364
Page 2: ......
