32
VINYL COVER
The vinyl spa cover is an attractive, durable foam insulation product.
Monthly cleaning and conditioning are recommended to maintain its
beauty.
To clean and condition the vinyl cover:
1. Remove the cover from the spa and gently lean it against a wall or
fence.
2. With a garden hose, spray the cover to loosen and rinse away dirt
or debris.
3. Using a large sponge and/or a soft bristle brush, and using a very mild
soap solution (one teaspoon dishwashing liquid with two gallons of
water), or baking soda (sodium bicarbonate), scrub the vinyl top in a
circular motion. Do not let the vinyl dry with a soap film on it before it
can be rinsed clean.
4. Scrub the cover’s perimeter and side flaps. Rinse clean with water.
5. Rinse off the underside of the cover with water only (use no soap),
and wipe it clean with a dry rag.
6. To condition the cover after cleaning, apply
MONARCH
Cover
Shield to protect the cover.
IMPORTANT:
To remove tree sap, use cigarette lighter fluid (not charcoal
lighter fluid). Use sparingly, and rinse with a saddle soap solution
immediately afterwards, then wipe dry.
DO:
Remove snow buildup to avoid breakage of the foam core from the
additional weight of the snow.
Lock cover lock straps to secure the cover when the spa is not in
use.
DON'T:
Drag or lift the spa cover using either the flaps, or the cover lock
straps.
Walk, stand, or sit on the cover.
Place any metal or heat transferring object on the cover or place
any type of plastic tarp or drop cloth over the cover as this may
result in a melted foam core, which would not be covered under
the warranty.
Use any lifting mechanisms, chemicals, or cleaners except those
recommended by Watkins Manufacturing Corporation, or its
Authorized Sales and Service Dealer.
Spa Care and Maintenance
Summary of Contents for Aventine
Page 1: ...VACANZA SERIES 2 0 1 7 O W N E R S M A N U A L 5 0 H z...
Page 38: ......
Page 39: ......
