36
UTOPIA OPERATING INSTRUCTIONS
MAIN CONTROL PANEL
The main control panel provides a quick visual check of the spa’s status and allows the user to set the temperature, activate the jets & lights, lock the temperature and/
or spa functions. Other optional functions may also be available depending on the spa model and accessory equipment that has been installed into the spa. The main
control panel has eight buttons.
HARD BUTTONS
The four labeled outer buttons are referred to as "Hard buttons". These buttons are fixed and their functions do not change.
JETS -
If jet pump indicator light is off and JETS hard button is pressed, the 1st jet pump function will activate and the main control panel display will advance to the Jets
menu.
If jet pump indicator light is on and the JETS hard button is pressed while in any screen other than the Jets menu, the jets pump function does not change, only the main
panel screen will change to the Jets menu.
LIGHTS
- If lights are off, press LIGHTS hard button from any screen to turn on all lights and display the Lighting Options menu. Continue to press the LIGHTS hard
button to cycle through lights zones.
OPTIONS
- Transitions to the Options screen to access temperature and setup menu
BACK
- Goes back one menu. In Home screen Hold BACK button until screen rotates 180° to view from inside spa. Repeat to reverse.
SOFT BUTTONS
The four inside buttons are referred to as "soft buttons". Pressing a soft button will activate the function on the control panel screen closest to that button. After a period of
non-use (45 seconds) the display will go back to the Home screen and will remain on for several minutes before going to sleep mode. Pressing any button will wake up a
sleeping display.
INDICATOR ICONS
At a glance, the indicator icons are visible on the main control panel. The indicator icons work independently from the rest of the control panel display. They are displayed
so that you may know the status of your spa at a glance. NOTE: Indicators will not be visible when Main Control Panel goes into sleep mode.
READY Indicator:
The READY indicator will display when the spa water temperature is within 1°C (2°F) of the set temperature, and will turn off when the
temperature is outside of that range. If you increase or decrease the temperature setting of the spa, the ready indicator will turn off until the water temperature
reaches the acceptable range for the new temperature setting. A flashing READY indicator means a problem may exists with the temperature sensor (see
Troubleshooting section for more information)
Spa Light indicator:
The Spa Light indicator is displayed when any light inside the spa is on. The indicator icon will remain solid as long as any manual light is
activated. Spa Light icon will flash only when Auto Exterior Light feature is operating the light.
LIGHTS Hard Button
Soft Button
Soft Button
JETS Hard Button
OPTION
Hard Button
BACK
Hard Button
Indicator Icons
Summary of Contents for CANTABRIA
Page 1: ...2 0 1 5 O W N E R S M A N U A L 5 0 H z...
Page 75: ......
