38
UTOPIA OPERATING INSTRUCTIONS
LOCKING FEATURES
The two locking features, Temperature Lock and Spa Lock, are activated at the main control panel. Once activated, a lock will remain active until the specific button
combination is pressed to disable the lock. Even if power to the spa is disconnected even briefly, the lock will remain activated.
TEMPERATURE LOCK
When activated, the Temperature Lock feature prevents a change in your desired water temperature setting. All other functions on the main and auxiliary control panels
will operate normally while the temperature lock is "ON". This feature prevents others from changing the desired settings.
To activate the Temperature Lock:
Press the OPTIONS hard button on the Main Control panel.
Press the soft button next to Temperature.
Press the soft button next to Temp Lock Off to change the screen to Temp Lock On.
IMPORTANT: The Temperature/Spa lock icon will be displayed during a temperature lock condition.
To deactivate the Temperature Lock:
Press the OPTIONS hard button at the Main Control panel.
Press the soft button next to Temperature
Press the soft button next to Temp Lock On to change the screen to Temp Lock Off and turn the Temperature lock and icon off.
LOCK OVERRIDE
The Lock Override feature is for spa users who normally keep the set temperature locked. Should the user wish to lock all spa controls temporarily, the spa lock can be
applied over an already-applied temperature lock. Then, when the spa lock is removed, the temperature lock will remain on to prevent unwanted tampering with the set
temperature.
SPA LOCK
When activated, the Spa Lock feature disables all functions on the main and auxiliary control panels. It prevents others from tampering with the jets, lights and
temperature settings on your spa. The control panel will not respond to any hard or soft buttons when in Spa Lock mode.
To activate the Spa Lock:
Press the OPTIONS hard button.
Press the soft button next to Set-up.
Press the soft button next to Spa Lock Off.
IMPORTANT:
The Temperature/Spa Lock icon will be displayed during a spa lock condition.
To deactivate the Spa Lock:
Press and hold the OPTIONS hard button and the LIGHTS hard button at the same time for 3 seconds. The spa lock will be
disabled and the icon will turn off.
IMPORTANT:
You can activate the spa lock feature even when the temperature lock is already on. You do not need to turn off the temperature lock in order to
turn on the spa lock feature. If the temperature lock is already on when you activate the spa lock, it will remain on when you turn off the spa lock.
JETS CONTROL
The JETS hard button activates the jet pump(s). When the JETS hard button is pressed, the jets menu will be displayed on the control panel with Low speed on Jet pump 1
pump turned on, the Jet Pump icon will alsobe displayed. Press any of the soft keys next to the description to change the jet functions between high, low speed (when
available), or off.
The Jet pump icon will remain displayed until the button is pressed to turn off the jet pump(s), or after one hour of continuous
operation when the pump(s) is automatically shut off by the control system.
The jet pump(s) will turn themselves off after one hour of continuous operation to prevent overheating and conserve energy. The jets can be
restarted again with no delay.
You may also activate the jet pumps by pressing the JETS hard button as follows:
Summary of Contents for CANTABRIA
Page 1: ...2 0 1 5 O W N E R S M A N U A L 5 0 H z...
Page 75: ......
