CalderaSpas CANTABRIA Owner'S Manual Download

Page: 46 / 76

AUXILIARY CONTROL PANEL BUTTONS

The auxiliary control panel, conveniently located opposite the main control panel allows the user to activate the jets, air jets and lights.

JETS BUTTON

There are two buttons which affect the jet pumps. Pressing any JETS button once will display the jets symbol on the main control panel display. The symbol will remain

displayed until the jet pump is turned off (see chart below), or after one hour of continuous operation when the pumps are automatically shut off by the control system.

GENEVA

NIAGARA

, and

TAHITIAN

models:

CANTABRIA

model:

JETS 1 button

JETS 2 button

JETS 1 button

JETS 2 & 3 button

1st press:

2nd press:

3rd press:

Jet pump 1 on.

Jet pump 1 off.

N/A

Jet pump 2 on low speed.

Jet pump 2 on high speed.

Jet pump 2 off.

1st press:

2nd press:

3rd press:

4th press:

5th press:

6th press:

Jet pump 1 on low speed.

Jet pump 1 on high speed.

Jet pump 1 off.

N/A

Jet pump 2 on low speed.

Jet pump 2 on high speed.

Jet pump 2 on high speed/Jet pump 3 on high speed.

Jet pump 2 on low speed/Jet pump 3 on high speed.

Jet pump 2 off/Jet pump 3 on high speed.

Jet pump 2 & 3 off.

AIR JETS BUTTON

The “AIR” button activates the air jets. When the “AIR” button is pressed, the air symbol will illuminate on the main control panel display. The icon will remain displayed

until the button is pressed to turn off the air jets, or after fifteen minutes when the air jets are automatically shut off by the control system. While the air jets system is on,

air only jets are operating throughout the spa. To stop the air jets when active, simply press the “AIR” button.

LIGHT BUTTON

The “LIGHT” button activates the

SPAGLO

multi-zone lighting system and controls the intensity of the light. Pressing the “LIGHT” button operates the light as follows:

• 1st press of the “LIGHT” button: all lights on.

• 2nd press: bartop lights off.

• 3rd press: waterfall light off.

• 4th press: main light,

EUPHORIA

Jet, and Grab Bar lights on

medium intensity; external sconce lights on full intensity.

• 5th press: main light,

EUPHORIA

Jet, and Grab Bar lights on low

intensity; external sconce lights on full intensity.

• 6th press: main light,

EUPHORIA

Jet, and Grab Bar lights off; external

sconce lights on full intensity.

• 7th press: all lights off.

If any lights are left on, they will automatically be turned off by the control system after six hours of continuous operation. The light icon on the control panel will also turn

off when the lights are deactivated.

If the light will not turn on, make sure SPA LOCK is deactivated. SPA LOCK disables the controls on both the main and auxiliary control panel. (See the SPA LOCK

section for more information on the SPA LOCK feature.)

CANTABRIA

ULTRAMASSEUSE

CONTROL PANEL

The

ULTRAMASSEUSE

system turns on automatically in the

ULTRAMASSEUSE

lounge when jet pump 3 is activated. At this time, all the jets are on, and only the

Speed indicator light is on. Pressing the Sequences button begins the jet massage.

Massage Sequence Indicator Lights

Speed button