JETS BUTTON
The JETS button is used for the jet pumps. Pressing JETS button once will illuminate the jets symbol on the control panel display. The symbol
will remain lit until the jet pumps are turned off, or after one hour of continuous operation when the pumps are automatically shut off by the control
system.
MAKENA
,
SALINA
&
MARTINIQUE
MODELS
:
•
1st press = low speed of jet pump 1
•
4th press = low speed of jet pump 1 & high speed of jet pump 2
•
2nd press = high speed of jet pump 1
•
5th press = high speed of jet pump 2
•
3rd press = high speed of jet pump 1 & 2
•
6th press = jet pumps off
KAUAI
MODEL:
•
1st press = jet pump on
•
2nd press = jet pump off
LIGHTS BUTTON
The “LIGHTS” button activates the LED lighting system and controls its intensity. Pressing the “LIGHTS” button operates the light as follows:
• 1st press of the “LIGHTS” button: light intensity on high
• 2nd press: light intensity on medium
• 3rd press: light intensity on low
If the light is left on, it will automatically be turned off by the control system after six hours of continuous operation. The light symbol on the control
panel will also turn off.
If the light will not turn on, make sure SPA LOCK is deactivated. SPA LOCK disables the controls on both the main and auxiliary control panel. (See the SPA LOCK
section for more information on the SPA LOCK feature.
SYSTEM MODE
Your spa is equipped with a System Mode. This function will allow you to conveniently turn the jet(s) on high speed and the light on maximum
intensity at the same time. If your spa is equiped with a wireless audio system it will not turn the audio on, however when the system mode is
deactivated the wireless audio system will turn off.
To activate the system mode, perform the following functions:
Press the "MODE
" button until
SYSON
is displayed on the screen. Press the "ON
"
button to activate the
SYSON
mode feature.
NOTE:
Once activated, any of the functions may be changed without effecting anything else.
To deactivate the system mode, press the "MODE
" button until
SYSON
is displayed on the screen. Press the "OFF
"
button to deactivate.
CLEAN CYCLE
The Clean Cycle has been provided as a convenient timer for water maintenance. When the mode is activated, jet pump 1 will turn on and run for ten
minutes (used for water maintenance). To activate the Clean Cycle, press the "MODE
" or "MODE
"
button until the word
CLEAN
is displayed on
the screen. Press the "ON
"
button to activate the
CLEAN
cycle feature.
NOTE:
The jet icon will flash on and off in the main display while the Clean Cycle is active.
To stop the Clean Cycle before the ten minutes is complete, Press the "MODE
" or "MODE
"
button until the word
CLEAN
is displayed on the screen. Press the
"OFF
"
button to deactivate.
NOTE:
Pressing the JETS button will also deactivate the clean cycle.
TOOLS MENU
The
TOOLS
menu is one of the main menus on the control panel. Within the
TOOLS
menu are five submenus, which consists of; Temp Lock, Spa
Lock, Light, Summer Timer and Exit.
To enter into the
TOOLS
menu, scroll through the main menus using the “MODE
” or “MODE
” button until the
TOOLS
menu is displayed.
Press the “ON
” button to enter into the
TOOLS
submenu, use the “MODE
” or “MODE
” button to scroll through the submenus. Once the
desired submenu is displayed, press the “ON
” button to activate the submenu or press the “OFF
” button to deactivate the submenu. To leave
the
TOOLS
submenu, scroll through the submenu until
EXIT
is displayed, press the “ON
” button to exit the submenu.
LOCKING FEATURES
The two locking features, TEMPERATURE LOCK and SPA LOCK, are enabled from the control panel by pressing the “MODE
” or “MODE
” button until the
TOOLS
menu is displayed. Then press the “ON
” button to enter the
TOOLS
submenus. Use the “MODE
” or “MODE
” button to scroll through the submenus to get to the
locking features. Once enabled, a lock will remain active until the specific button combination is applied to disable the lock. Even if power is disconnected from the hot tub
and soon thereafter reapplied (such as in a power outage) the lock will remain in place.
46
PARADISE OPERATING INSTRUCTIONS
Summary of Contents for CANTABRIA
Page 1: ...2 0 1 5 O W N E R S M A N U A L 5 0 H z...
Page 75: ......
