www.caldura.co.uk
IM06/21122007
Introduction
Thank you for purchasing the Caldura Home Ice Maker.
Home Ice Makers are designed to make small to medium amounts of
ice very quickly. The Caldura Home Ice Maker is very easy to use
and can make three different sizes of “cube” to suit your
requirements.
This manual explains how to install and use the Ice Maker, and also
contains some important safety advice. Please read it carefully
before using the product.
Installation
Before use, please carry out the following installation procedure:
Clean the interior of the Ice Maker with lukewarm water using a soft
damp cloth.
Place the unit on a level surface which is capable of supporting the
unit when fully loaded.
The unit should be located in a cool, dry place at least 15cm from
any walls and away from direct sunlight.
The unit should be installed in a place where the ambient
temperature is within the range 15 to 30ºC. If the ambient
temperature is outside of this range, the performance of the unit may
be affected.
If the unit has been transported, tipped up, or disturbed in any other
significant way, it should be allowed to stand upright for
at least two
hours
before being connected to the mains. The unit is cooled by a
liquid, and this needs to have time to fully settle before the unit can
function effectively.
Connect the unit to a standard 13 amp earthed electrical power
outlet using the power cord provided.
Safety Instructions
In order to avoid electric shock, do not open the casing of the Ice
Maker. There are no user serviceable parts inside and any problems
should be reported to your supplier.
