www.caldura.co.uk
IM06/21122007
Never obstruct the air vents.
Never allow children to operate or play with the Ice Maker.
Never clean the unit with flammable liquids, the fumes can create a
fire hazard or explosion.
Do not store or use gasoline or any other flammable vapours and
liquids in the vicinity of this unit or any other electrical appliance.
The fumes can create a fire hazard or explosion.
The unit is supplied fitted with a standard UK 13 amp plug, if the
power cord becomes damaged; have it replaced by a qualified
electrician. Proper earthing of the unit is essential for your safety.
Any excess cord should be secured behind the unit and not left
exposed or dangling to prevent accidental injury.
Operation
Open the lid of the Ice Maker and fill the water reservoir. Make sure
the water level does not come over the bottom of the ice collection
basket.
Select the desired ice cube size by pressing the Select button.
Press the start button to turn the unit on. After a few seconds the
compressor will start and the ice making process will begin.
After approximately 8 to 12 minutes (depending on the cube size
selected) your first batch of ice cubes will be ready. Once made,
they will be automatically swept into the ice collection basket and the
ice making process will start again. The unit will continue to make
ice until the Stop button is pressed, the ice collection basket is full, or
the water reservoir is empty.
If the Ice Maker stops for any reason do not restart it for at least 3
minutes.
Cleaning and Maintenance
To ensure cleanliness of the ice cubes, water in the reservoir should
be replaced every 24 hours.
Before draining or cleaning the Ice Maker, unplug it and remove all
ice cubes.
