www.caldura.co.uk
MF20/02012008
Introduction
Thank you for purchasing the Caldura Mini Fridge.
The Caldura Mini Fridge is a high quality thermostatically controlled unit. It
can be powered from the mains, or a car cigarette lighter socket. The unit
can also be used in “Hot” mode to keep food warm.
This manual explains how to install and use the Mini Fridge, and also
contains some important safety advice. Please read it carefully before using
the product.
Installation
Before use, please carry out the following installation procedure:
Clean the interior of the unit with lukewarm water using a soft damp cloth.
Place the unit on a level surface which is capable of supporting the unit
when fully loaded.
The unit should be located in a cool, dry place at least 5cm from any walls
and away from direct sunlight.
The unit should be installed in a place where the ambient temperature is
within the range 10 to 25ºC. If the ambient temperature is outside of this
range, the performance of the unit may be affected.
Either: connect the unit to a standard 13 amp earthed electrical power outlet
using the power cord provided – set the power mode switch on the rear of
the unit to AC.
Or: connect the unit to a standard car cigarette lighter outlet using the cord
provided – set the power mode switch on the rear of the unit to DC.
Safety Instructions
In order to avoid electric shock, do not open the casing of the Mini Fridge.
There are no user serviceable parts inside and any problems should be
reported to your supplier.
Never obstruct the air vents.
Never allow children to operate or play with the Mini Fridge.
Never clean the unit with flammable liquids, the fumes can create a fire
hazard or explosion.
Do not store or use gasoline or any other flammable vapours and liquids in
the vicinity of this unit or any other electrical appliance. The fumes can
create a fire hazard or explosion.
The unit is supplied with a mains lead fitted with a standard UK 13 amp plug,
if the power cord becomes damaged; replace it immediately. Any excess
