5.
Cut off the excess parts using cutting nippers.
Fasten the panel with the screws provided in the package.
6.
Connect the electric supply cables to the connector
respecting the
polarity:
Connect the cables to the boiler command connector (if present).
BOILER CONTAC ELECTRIC SUPPLY
CONNECTOR
CONNECTOR 24 V (dc)
7.
Refit the front panel lining up the top of the front and rear panels and
gently push it until it locks into place.
You can fit a tamper-proof screw to prevent
undesired opening of the controller. use the
dedicated hole at the bottom of the controller.
8.
Electrically supply the controller.
9
