The controller allows selecting winter and summer mode.
Starting from the main menu select:
–>
Select the desired mode and press the confirmation button. In WINTER mode, all the heating settings will be active.
In SuMMER mode, all the heating settings will be inactive.
The valves will close and the boiler contact will always be deactivated.
In this mode, the radio communications between the controller and the actuators are reduced (extending the
communication time intervals between the devices up to 20 minutes) to the advantage of actuator battery life.
SUMMER/WINTER MENU
(Operation selection of winter heating/system off in summer)
SETTINGS MENU
Starting from the main menu select:
–>
TIME & DATE
Allows changing the time and date. Follow the on-screen instructions.
LANGUAGE
Allows selecting the desired menu language. Follow the on-screen instructions.
DISPLAY
Allows customising the display with the following options:
- MAIN ZONE. To select your favourite zone that will be shown in the main menu. Follow the
on-screen instructions.
- BACKLIGHT. To set the time interval before the screen automatically turns off (settable from
1 to 15 minutes) Follow the on-screen instructions.
- COLOuRS. To select the display colour theme.
SCENARIO
Allows saving and subsequently using all the control unit parameters set at a given moment.
Three scenarios can be stored. Follow the on-screen instructions.
SOUND
Activates/deactivates the sound. Follow the on-screen instructions.
MENU
SUMMER/WINTER
MENU
SETTINGS
TIME & DATE
LANGUAGE
DISPLAY
SCENARIO
SOUND
17
Note:
When the system is restarted during winter, you may have to wait up to 20 minutes for system
reactivation (boiler activation and actuator opening).
Do not remove the batteries in the summer period in order to allow the actuators to perform the anti-lock
procedure (complete opening and closing every 10 days).
