Manufactured in the U.S.A.
alum
LEDs
™
CALIFORNIA ACCENT LIGHTING, INC.
2820 E. Gretta Lane, Anaheim, CA 92806
ph. 800.921.CALI (2254) | fx. 714.535.7902 | info@calilighting.com | calilighting.com
© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.
Page 1 of 11
INSTALLATION
Overview
ALS
600T-AD
2019.12.5 Rev 2
ELECTRICAL
• Line voltage luminaire do not require a remote driver
• Calculate Load (Driver/Power Supply)
To calculate load, multiply watts per foot by length. Example: 4 Watts x 4’ = 16 Watts
• Maximum load per line voltage fixture = 320 watts per circuit
• Maximum load per low voltage fixture (JA8) = 50 watts per circuit
Lower
Extrusion
(Stationary)
Mounting Clip
(ALS600T-AD-MC)
Power Connector
(ALS600T-AD-PC)
LED with Optics
(Included)
Tempered Clear Glass Lens
(ALS600T-AD-CGL)
Upper Extrusion
(Adjustable Angle)
IMPORTANT NOTICE:
VERIFY CORRECT LUMINAIRE WAS RECEIVED WITH
CORRECT COLOR TEMPERATURE AND VOLTAGE BEFORE CUTTING OR INSTALLING.
CALI WILL NOT BE RESPONSIBLE IF INCORRECT LUMINAIRE IS INSTALLED.
READ ENTIRE GUIDE BEFORE STARTING INSTALLATION
PRODUCT INFORMATION
• Lighting for coves, undercabinet, accent, displays
• Line Voltage or Low Voltage (integral or remote transformer drivers)
• Choose from a variety of LED colors and whites
• Available in 3 Watts up to 24 Watts Per Foot (product is shipped in 1’, 2’, 3’, and 4’ luminaires)
• Available for outdoor rated installations
INSTALLATION RECOMMENDATIONS
• AlumLEDs can be mounted to sheetrock, concrete, or wood using proper mounting screws
• All wiring is enclosed inside aluminum housing
• Provide run lengths at time of order
• AlumLEDs is suitable for indoor (Dry) or outdoor (IP65 or IP67) applications
INSTALLATION TOOLS REQUIRED
• Electric Hammer Drills (optional)
• 14.4 to 28 Volt Cordless Drills
• Phillips Bits - Sufficient Quantity
• Utility Knife
• Electrical Cords
• Marker
• Wire Strippers
• Long Nose Pliers
• Drill Bits - Concrete or Wood
• Electrical Three Ways
• Safety Glasses
• Measuring Tapes
• Chalk Line
FEATURES
APPLICATIONS
Wall Wash Lighting
LAMP TYPE
High Output LEDs (No Mercury)
CRI
> 90
LENS
Tempered Clear Glass Lens
OPTICS AND ASYMMETRIC
10°-60° and Asymmetric Optics
LENGTH
1’6” , 2’, 3’, 4’
CONSTRUCTION
Aluminum Extrusion
WEIGHT
2.52lbs (1’), 4.92lbs (2’), 6.95lbs (3’), 8.98lbs (4’)
MOUNTING
Mounting Clips
LISTING
Dry or Wet (IP65 or IP67) Location
UL1598, CSA C22.2#250.0
UL8750, CSA250
UL2108, CSA C22.2 #9
INSTALLATION
Link to Installation Instructions
ELECTRICAL
DIMMING
0-10V
MAXIMUM RUN
(Line Voltage)
40’ (3W, 6W), 35’ (9W), 26’ (12W), 21’ (15W), 17’ (18W)
MAXIMUM RUN
(Remote Driver)
14’ (3W), 7’ (6W), 5’ (9W), 3’6” (12W), 3’ (15W), 2’6” (18W)
PRIMARY
VOLTAGE
120V or 277V
SECONDARY
VOLTAGE
24VDC
TEMPERATURE RATINGS
Operating / Startup:
-20° to 48°C (-4° to 120°F)
Storage:
-40° to 76°C (-40° to 170°F)
