Press a key one time, moves the antenna one step in the corresponding direction. The step size
is defined at the Web interface.
The antenna can be moved over the front panel with the JOG MODE menu. The corresponding
keys are listed below:
7 --- Move the polarization counterclockwise
9 --- Move the polarization clockwise
2 --- Select high speed (pressed together with an arrow key)
--- Move the elevation up/down
--- Move the elevation east/west
The antenna will as long move as longe a key is pressed in the corresponding direction.
The antenna will stop the position keeping, the status will be displayed in the main screen with ---
Standby --- blinking in the second line.
Choose the Menu entry a second time or press 2 (shift) and
together to leave this Mode.
6.8 Set az, el, pl by editing Numeric Parameters
To change a numeric parameter like Azimuth, Elevation or Polarization. Here an example for the
azimuth axis: select SET AZIMUTH from the main menu.
The lower display line shows the actual value. You enter the new value, using the number keys.
The arrow up key adds a (-) in front of the numeric value and the arrow down adds a (.). The key
clears the entered value.
To accept the edited value, press
. This checks the entered value against its limits and
executes the parameter change. Pressing
twice (the first key press clears the display)
(C) 2022, SatService GmbH
www.satnms.com
ACU-19V2-UM-2209 Page 37/65
