Board 2:
Moxa Smartio/Industrio 4-port board at
Board 3:
Moxa Smartio/Industrio 4-port board at
tty-names:
ttyS11, ttyS12, ttyS13, ttyS14, ttyS15, ttyS16, ttyS17, ttyS18 (board1)
ttyS21, ttyS22, ttyS23, ttyS24 (board2)
ttyS31, ttyS32, ttyS33, ttyS34 (board3)
VLC Serial IO Card Configuration 12
No. of boards: 2
No. of ports:
16
Board 1:
Board 2:
tty-names:
ttyS11, ttyS12, ttyS13, ttyS14, ttyS15, ttyS16, ttyS17, ttyS18 (board1)
ttyS21, ttyS22, ttyS23, ttyS24, ttyS25, ttyS26, ttyS27, ttyS28 (board2)
VLC Serial IO Card Configuration 13
No. of boards: 3
No. of ports:
20
Board 1:
Board 2:
Board 3:
Moxa Smartio/Industrio 4-port board at
tty-names:
ttyS11, ttyS12, ttyS13, ttyS14, ttyS15, ttyS16, ttyS17, ttyS18 (board1)
ttyS21, ttyS22, ttyS23, ttyS24, ttyS25, ttyS26, ttyS27, ttyS28 (board2)
ttyS31, ttyS32, ttyS33, ttyS34 (board3)
VLC Serial IO Card Configuration 14
No. of boards: 3
No. of ports:
24
Board 1:
Board 2:
Board 3:
tty-names:
ttyS11, ttyS12, ttyS13, ttyS14, ttyS15, ttyS16, ttyS17, ttyS18 (board1)
ttyS21, ttyS22, ttyS23, ttyS24, ttyS25, ttyS26, ttyS27, ttyS28 (board2)
ttyS31, ttyS32, ttyS33, ttyS34, ttyS35, ttyS36, ttyS37, ttyS38 (board3)
Serial IO Hardware Setting (4-PORT / 1)
The first Moxa Smartio/Industrio 4-port board in a VLC is operated at at 0x180 / IRQ 10, which is the
factory default setting for these boards. So, usually the board can be used out of the box.
If you want to install a board which already has been configured to work as second or third board in a
VLC, you have to reset the IO/IRQ settings of this board. The following steps describe how to install the
card into a running VLC.
(C) 2020, SatService GmbH
www.satnms.com
VLC-IM-2002 Page 21/39
