14
GRILL BURNER ASSEMBLY AND USE
The Rockwell by Caliber™ Grill is equipped with 3 high quality, non-rusting, patent pending Stainless Steel burners
which when coupled with the patent pending burner radiants produce an even intense heat that will grill uncom-
monly even. With this ultra-even heating of the grill, you will be able to cook your food wherever you please and not
be concerned with “finding” or avoiding the “hot spot” that most other grills have.
Please assure that all grill burner components are in place before you grill - see illustration below:
Caliber Crossflame™ Burner - The patent pending U-shaped grill burner with its unique crossover porting bars
is the heart of the even grilling system and should be locked in place with its retaining bracket as shown below.
The Caliber Crossflame™ Radiant - The patent pending peaked shape of our radiant assists in evenly spreading
heat as well as shedding grease and protecting the grill burner and burner ports below it.
The radiant shown below rests on 4 stainless steel pins in the front and rear of the firebox and must always
be in place when grilling as it protects the burner ports from getting clogged with grease and causing burner
performance issues.
Note the vertical Stainless Steel panel
that rests on the pins between each
burner. These panels are “Heat Zone
Dividers” and give you ultimate control,
not just over the entire grill surface, but
within each zone over each burner. As an
example, one zone may be set on high for
searing steaks while another may be grill-
ing fish or other delicate items at a lower
temperature just one burner over.
