SPECIFICATIONS, CONNECTIONS AND BUTTONS
Input:
5V DC 1.0A (by adapter 100V~240V, 50/60Hz)
Power Consumption:
3,2W
Frequency range:
FM 87.5 - 108MHz
DAB 174.928MHz - 239.200MHz
Speaker:
1.5W RMS
Backup battery (for clock memory):
2x 1,5V (AAA/LR03) - not included
Dimensions:
108(W) x 125(D) x 48(H)mm
1. Mode / Standby
q
button
Push repeatedly to switch between:
FM radio / DAB+ radio / OFF (standby)
2. Volume - decrease
#
- To lower the volume, press this button
3. increase
$
- To turn up the volume, press this button
4. Snooze / enter
- Snooze
when alarm is active, press the button to activate
Snooze, the alarm will come on again in 9
minutes.
- Enter
press to confirm selection
press to turn on back-light
Press and hold for auto scan radio stations
5. Tune -
- Scroll down the stored stations [DAB]
- Turn the frequency down by 0.05MHz [FM]
- Press and hold to scan until next station [FM]
6. Tune +
- Scroll up the stored stations [DAB]
- Turn the frequency up by 0.05MHz [FM]
- Press and hold to scan until next station [FM]
7. Info/Menu
- Info Press the button repeatedly to view various
info broad-casted by the radio station.
- Press and hold to enter the main menu, use tune
+/- to navigate trough the options.
8. Wire antenna
Extend as far as it can for best reception
9. DC in jack (5V 1.0A)
We are continuously improving/updating our products and product information.
It’s therefore possible that there is a slight difference between the description in this manual to the operation of the product.
If something is different or not clear; always check our website for the most current version.
