7
24
Fixing Screw Bolt
Radio Antenna Wiring Connecting Socket 2
Wiring Connecting Socket 1
1.7 Wires Connection Description
The Description of the Input/Output Interface of the Rear Cabinet
WHITE
GREEN
YELLOW
BLACK
REVERSAL LINE
PARKING LINE
REAR VIEW CAMERA
WIRING CONNECTING SOCKET 2
WIRING CONNECTING PLUG 2
Description of the Wiring Diagram for Socket 1
Description of the Wiring Diagram for Socket 2
YELLOW
MEMORY B+
BLACK(GND)
IGNITION SWITCH
BLUE AUTO ANT
GREEN
SUBWOOFER OUTPUT
RED
FRONT
REAR
RIGHT
SP
FRONT
WHITE
WHITE / BLACK
GREEN / BLACK
VIOLET / BLACK
GRAY / BLACK
GRAY
VIOLET
GREEN
REAR
LEFT
SP
+
+
+
+
WHITE(L)
RCA OUTPUT
FUSED
FILTER
BOX 1A
& 10 A
FUSES
WIRING CONNECTING SOCKET 1
WIRING CONNECTING PLUG 1
NOTES:
1. Only speakers with 4 ohms impedance may be used.
2. Ensure that the blue auto antenna cable does not make contact
with any ground connection.
GRAY
ISO CONNECTOR
RED(R)
1. Parking wire must be connected. And the parking brake must be engaged in order for the monitor to work.
2. Use the clip end of the Ground Wire provided by manufacturer to connect Mounting Screw, using the other
end of the Ground Wire to connect the negative pole of the power source. Otherwise, the video on screen
maybe flashes.
YELLOW
YELLOW
VIDEO LINE OUT
BT Microphone in
4.23.2 LANGUAGE SETUP
OSD LANGUAGE
This item is for selecting the language of the
SYSTEM MENU and all operating prompt
interface displayed during playback.
AUDIO LANG
This item is for selecting a audio language.
SUBTITLE LANG
This item is for selecting a subtitle language.
MENU LANG
This item is for selecting a disc menu language.
4.23.3 AUDIO SETUP
KEY
It is for selecting your desired basic music tone
(from low to high).
4.23.4 VIDEO SETUP
BRIGHTNESS
It is for adjusting the brightness of the video output.
CONTRAST
It is for adjusting the contrast of the video output.
HUE
It is for adjusting the hue of the video output.
SATURATION
It is for adjusting the saturation of the video output.
SHARPNESS
It is for adjusting the sharpness of the video output.
