REPEAT/PLAY MODES
Every time the MODE button is pressed, the corresponding mode
appears in the display window.
NOTE: In normal mode, none of the above mode symbols will be
shown in the display.
NORMAL PLAYBACK
During normal playback a
indicator
appears on the display when the batteries
need to be changed.
Shown on the LCD display. The
current track on the disc will be
repeated.
Shown on the LCD display. All
tracks on the disc will be
repeated.
INTRO PLAY
1. Press the MODE button three times;
INTRO
will display.
2. Press the PLAY/PAUSE button, starts
INTRO
play from track no.01.
3. Select
INTRO
mode during play;
INTRO
starts
flashing.
•
Press the PLAY/PAUSE button. Flashing will
stop and
INTRO
play will start from track no.
01.
•
Press
>>I
to play the current track. Flashing
will stop, and
INTRO
play will start from next
track.
•
Press
I<<
. Flashing will stop and
INTRO
play
will start from current track.
PROGRAM PLAY
1. Press the PROG button; PROGRAM will start
flashing.
2. Press
I<<
or
>>I
to select the desired track.
3. When the desired track is displayed, press
the PROG button to register. The track No.
display changes to 00 again.
4. Repeat steps 2 and 3 to program the order of
more tracks. Up to 20 tracks can be
programmed into memory.
To complete programming and start playback
Press the PLAY/PAUSE button. PROGRAM will
stop flashing and playback will begin.
To clear programming
• Register 00 on the first program track.
•
Open the door.
•
Power Off
This allows selected tracks on the disc to be played in any desired
order.
To set the program play
•
Programming can be set in the STOP mode or normal play mode.
califone.com
califone.com
10
11
cdmanual - JH 2009.08.27.indd 12-13
8/27/2009 12:14:48 PM
