California Air Tools 10020 Owner'S Manual Download

Page: 2 / 17

Customer Support: 1-866-409-4581

AIR COMPRESSOR

model: 10020

TAbLe OF CONTeNTS

IntroductIon __________________________________2

Important Safety InStructIonS _______________3

LocatIonS of Important LabeLS _______________6

aIr compreSSor componentS__________________7

pre-operatIon checkLISt ______________________8

package contents & assembly____________________8
Inspect for damage _____________________________9
Save packaging ________________________________9
compressor Location ___________________________9
electrical power _______________________________10

operatIng the aIr compreSSor _______________10

Introduction __________________________________10
assembly ____________________________________10
test run & break-in period ______________________11
daily operation ________________________________11

maIntenance _________________________________12

draining the air tank ___________________________12
changing the air filter__________________________12
testing for Leaks ______________________________12
adjusting the pressure Switch ___________________12
cleaning _____________________________________12

Storage ______________________________________12

troubLeShootIng ____________________________13

SpecIfIcatIonS________________________________14

electrical circuit _______________________________14
air passage drawing ___________________________14

Warranty ____________________________________15

product regIStratIon________________________17

INTROduCTION

thank you for purchasing a california air tools, Inc.

air compressor.

record the model and serial numbers indicated on your

air compressor’s nameplate:

model no. ________________________________________

Serial no. ________________________________________

date of purchase: _________________________________

Store/dealer: _____________________________________

Summary of Contents for 10020


















Search results

Summary of Contents for 10020

Reviews:

Related manuals for 10020

Brands by name

Popular brands

California Air Tools 10020, Owner'S Manual

Search results

Summary of Contents for 10020

Reviews:

Related manuals for 10020

Brands by name

Popular brands