background image

15

Customer Support: 1-866-409-4581

AIR COMPRESSOR

CALIFORNIA AIR TOOLS INC. LIMITed WARRANTy

This warranty is limited to Air Compressors distributed by:

California Air Tools, Inc.
8560 Sieper Viva Road
San diego, CA 92154

Limited Warranty

California Air Tools Inc. will repair or replace, free of charge, to the original retail customer who purchased a California Air Tools, Inc.

Air Compressor from an authorized dealer, distributor or distributor’s dealer in North America.
This warranty does not transfer to subsequent owners.
California Air Tools Inc. will repair or replace, at its option, any parts of the portable air compressor that are proven by an authorized

service center to be defective in material or workmanship under normal use during the applicable warranty time period as stated below.

This limited warranty covers the cost of the replacement parts and labor for all defects when installed by an authorized service center.

Transportation charges are the responsibility of the customer. Any part replaced under warranty becomes the property of California Air

Tools Inc. 
All parts replaced under warranty will be considered as part of original product, and any warranty on those parts will expire coincident with

the original product warranty.

Limited Warranty periods

Non-commercial / Non-rental (personal use by a retail customer): 

1 year parts and labor

Commercial / Rental (usage for income, business use):

1 year parts and labor

The limited warranty period begins on the date of retail purchase by the original purchaser.

disclaimers, Limitations of remedies & exclusions

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.

disclaimer of other Warranties

To the fullest extent permitted by applicable law, this limited warranty is exclusive and expressly in lieu of any and all other warranties,

including, without limitation, any implied warranties of merchantability or fitness for a particular purpose or any other implied warranties

that may arise from the course of dealing or usage of the trade. California Air Tools Inc. hereby declaims and excludes all other

warranties. To the extent that California Air Tools Inc. products are consumer products under applicable federal and state law with respect

to any customer, the duration of any implied warranties (including but not limited to implied warranties of merchantability or fitness for a

particular purpose) are limited to the shortest duration permitted by applicable law or the Limited Warranty period provided herein,

whichever is longer.

Limitations of remedies

California Air Tools Inc. shall not be liable to customer, or anyone claiming under customer, for any other obligations or liabilities, including

but not limited to, obligations or liabilities airing out of breach of contract or warranty, negligence or other tort or any theory of strict liability,

with respect to the air compressor or California Air Tools Inc. acts or omissions or otherwise. To the fullest extent permitted by applicable

law, California Air Tools Inc. shall not in any event be liable for incidental, compensatory, punitive, consequential, indirect, special or other

damages, including but not limited to loss of use, loss of income, loss of time, loss of sales, injury to personal property, or liability

customer incurs with respect to any other person, or any other type or form of consequential damage or economic loss.

Summary of Contents for 10020CHAD-22060


















Reviews: