8
Customer Support: 1-866-409-4581
AiR CoMPReSSoR
PRe-OPeRATION CheCkLIST
package contents & assembly
model: 12V1p10S
package contents:
Air Compressor
Owner's Manual
Air Filter
assembly:
attaching the air filter to the air compressor.
Screw (hand tight) the air filter on to the back right side of the motor.
attaching the air hose to the air compressor
.
Attach a 1/4” universal or Industrial Male Quick Connector to an
air hose.
Push the 1/4” universal or Industrial Male Quick Connector
(on the air hose) into the 1/4” universal or Industrial Female Quick
Connector attached to the air compressor.
attaching the power cord to the battery
before attaching the air compressor battery clamps to the battery
check to make sure that the ON/OFF switch on the air compressor
is in the OFF position.
Attach the Positive battery clamp (Red) to the Positive Terminal of
the battery and the Negative battery clamp (black) to the Negative
Terminal of the battery.
keep all power cords and air hose clear of all moving parts
and objects for safety.
Use this air compressor with a 12 Volt DC system only.
Use this air compressor with a 12 Volt DC system only.
Keep all power cords and air hoses clear of all moving parts.
Keep all power cords and air hoses clear of all moving parts.
Moving parts can attach to the cords or hoses causing severe
Moving parts can attach to the cords or hoses causing severe
trauma.
trauma.
This product should never be left unattended durning use.
This product should never be left unattended durning use.
