8
Customer Support: 1-866-409-4581
AIR COMPRESSOR
electrical power
electrical power requirements
before using the air compressor, refer to the serial label for
voltage and amperage requirements. Make sure you have a
sufficient electrical supply for supporting the motor's requirements.
use a dedicated 220 Volt 60 Hertz circuit.
Low voltage and/or an overload circuit can cause the motor's
overload protection system circuit breaker to trip.
electrical extension cord
Inspect all electrical extension cords to ensure that they are free
of
Inspect all electrical extension cords to ensure that they are free
of damage.
When using an extension cord, use a heavy-duty cord that is no
more than 25 feet long and at least 14 gauge.
use only a 3-wire extension cord that has a 3-blade grounding
plug.
OPeRATINg THe AIR
COMPReSSOR
Save this manual for future reference.
Introduction
This air compressor features a compact structure, stable,
performance, a high airflow rate, easy operation and low
maintenance. because the air compressor produces no oil in the
airflow, it can be used for air supplies that need oil-free air.. The
motor directly drives the pistons and does not need any
lubrication or oil to function for a long period of time.
assembly
1.
Attach the air hose to the 1/4” (universal / Industrial) coupler.
2.
Make sure the drain valve is off and that the power switch is in
the OFF position.
3.
ensure that the power supply you are going to use is operating
normally.
4.
Insert the power supply cord into the power supply socket.
DANGER
DANGER
There is a danger of electric shock.
There is a danger of electric shock.
Use only undamaged electrical cords.
Use only undamaged electrical cords.
DO NOT touch bare wires or receptacles.
DO NOT touch bare wires or receptacles.
DO NOT operate air compressor in wet weather or in wet
DO NOT operate air compressor in wet weather or in wet
conditions.
conditions.
DO NOT touch air compressor or cords if hands or feet are
DO NOT touch air compressor or cords if hands or feet are
wet.
wet.
Ensure that all cords are free of damage before connecting
Ensure that all cords are free of damage before connecting
to the power supply.
to the power supply.
Ensure that you have a sufficient electrical supply for
Ensure that you have a sufficient electrical supply for
supporting the requirements of the motor.
supporting the requirements of the motor.
Improper installation of the grounding plug is able to result
Improper installation of the grounding plug is able to result
in a risk of electric shock. When repair or replacement of the
in a risk of electric shock. When repair or replacement of the
cord or plug is required, do not connect the grounding wire
cord or plug is required, do not connect the grounding wire
to either flat terminal. The wire with insulation having an
to either flat terminal. The wire with insulation having an
outer surface that is green with or without yellow stripes is
outer surface that is green with or without yellow stripes is
the grounding wire.
the grounding wire.
This product must be grounded. In the event of an electrical
This product must be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electrical shock
short circuit, grounding reduces the risk of electrical shock
by providing an escape wire for the electric current.
by providing an escape wire for the electric current.
This product is equipped with a cord having a grounding
This product is equipped with a cord having a grounding
wire with an appropriate grounding plug. The plug must be
wire with an appropriate grounding plug. The plug must be
plugged into an outlet that is properly installed and
plugged into an outlet that is properly installed and
grounded in accordance with the local codes and
grounded in accordance with the local codes and
ordinances.
ordinances.
This product is for use on a nominal 220-V circuit and has a
This product is for use on a nominal 220-V circuit and has a
grounding plug similar to the plug illustrated in sketch A.
grounding plug similar to the plug illustrated in sketch A.
Only connect the product to an outlet having the same
Only connect the product to an outlet having the same
configuration as the plug.
configuration as the plug.
Do not use an adapter with this product.
Do not use an adapter with this product.
SHOCK
SHOCK
