background image

15

Customer Support: 1-866-409-4581

AIR COMPRESSOR

Exclusions 

In addition to the foregoing disclaimers, limitations and terms, this limited warranty shall not apply to and does not cover accessories, nor 
does it cover products that are in any way subject to any of the following: 

1.

 Improper setup, installation or storage. 

2.

 Lack of proper maintenance and service. 

3.

 Accident, damage, abuse or misuse. 

4.

 Abnormal operating conditions or applications. 

5.

 Repair or modification by customer or any third party without written consent of California Air Tools Inc. 

6.

 Use under operating conditions or in applications not recommended by California Air Tools Inc. 

7.

 Abnormal wear. 

8.

 The use of accessories or attachments not recommended by California Air Tools Inc. 

9.

 Repairs without California Air Tools prior written approval 

10.

 Incorrect voltage, improperly wired or failure to have a certified licensed electrician install the air compressor. 

11.

  Acts of God. 

The application of these exclusions will be determined at the sole discretion of California Air Tools Inc. 

 

Registration 

Warranty registration with California Air Tools Inc. is required on all products. 

You can mail the enclosed registration form or complete on-line at www.californiaairtools.com under the “Contact Us”  Tab. 

Warranty is also available by keeping and showing your original receipt from the date of purchase to an Authorized California Air Tools 
Service Center. 

 

 

Maintenance & Trouble Shooting  

 

WWW.CALIFORNIAAIRTOOLS.COM 

 

Go to the “Maintenance & Trouble Shooting Guide”  Tab 

 
 

Service 

Do not return your air compressor to the place of purchase. 

Warranty is available by showing your original receipt with the date of purchase to an Authorized California Air Tools Service Center. 

 

For all customer service inquiries. 

Contact California Air Tools Customer Service  

1-866-409-4581  M - Th (8am - 4pm)  Fri (8an-2pm) Pacific Time 

Customerservice@californiaairtools.com 

 

WWW.CALIFORNIAAIRTOOLS.COM 

  

Go to the “Contact Us”  Tab 

Click on the Parts or Service Tab for faster service.

Summary of Contents for 20060CAD
















Reviews: