10
Customer Support: 1-866-409-4581
AIR COMPRESSOR
Electrical Power
Electrical Power Requirements
Before using the air compressor, refer to the serial label for voltage
and amperage requirements. Make sure you have a sufficient
electrical supply for supporting the motor's requirements.
Use a dedicated 15 Amp Circuit or a 2500 Watt (running)
Generator
Low voltage and/or an overload circuit can cause the motor's
overload protection system circuit breaker to trip.
Electrical Extension Cords
Inspect all electrical extension cords to ensure that they are free of
damage.
When using an extension cord, use a heavy-duty cord that is no
more than 25 feet long and at least 14 gauge.Use only a 3-wire
extension cord that has a 3-blade grounding plug.
OPERATING THE AIR
COMPRESSOR
Save this manual for future reference.
Introduction
This air compressor features a compact structure, stable
performance, a high airflow rate, easy operation and
maintenance. Because the air compressor produces no oil in the
airflow, it can be used as an independent air supply machine for
situations in which oil in the airflow is an issue. The motor directly
drives the pistons and is able to function without lubrication for a
long period of time.
Assembly
1.
Connect your air supply hose to a 1/4” male industrial quick
connect coupler. Connect the male quick connect coupler to the
female quick connect coupler located on the air compressor
2.
Make sure the drainage valve is off and that the pressure
switch is in the OFF position.
3.
Ensure that the power supply you are going to use is
operating normally. 110 Volts 60 Hertz 15 amp Outlet.
4.
Insert the power supply cord into the power supply socket.
