3
Customer Support: 1-866-409-4581
AIR COMPRESSOR
How to find a local service center:
Even quality built equipment might need service or repair parts.
Contact the California Air Tools Customer Service Department:
Phone: 1-866-409-4581
Online: WOWED.CALIFORNIAAIRTOOLS.COM
Please provide the information below:
Model number and Serial number and specifications shown on the
Model number/Serial number plate.
Part number or numbers shown in the parts list section of the
owner’s manual for your air compressor model.
A brief description of the trouble with the air compressor.
Do not return your air compressor for service or parts to the
store/dealer where purchased.
IMPORTANT SAFETY
INSTRUCTIONS
Safety Messages & Signal Words:
DANGER
DANGER
There is a danger of electric shock.
There is a danger of electric shock.
Use only undamaged electrical cords.
Use only undamaged electrical cords.
DO NOT touch bare wires or receptacles.
DO NOT touch bare wires or receptacles.
DO NOT operate air compressor in wet weather or in wet
DO NOT operate air compressor in wet weather or in wet
conditions.
conditions.
DO NOT touch air compressor or cords if hands or feet are
DO NOT touch air compressor or cords if hands or feet are
wet.
wet.
Ensure that all cords are free of damage before connecting
Ensure that all cords are free of damage before connecting
to the power supply.
to the power supply.
Ensure that you have a sufficient electrical supply for
Ensure that you have a sufficient electrical supply for
supporting the requirements of the motor.
supporting the requirements of the motor.
Improper installation of the grounding plug is able to result
Improper installation of the grounding plug is able to result
in a risk of electric shock. When repair or replacement of the
in a risk of electric shock. When repair or replacement of the
cord or plug is required, do not connect the grounding wire
cord or plug is required, do not connect the grounding wire
to either flat terminal. The wire with insulation having an
to either flat terminal. The wire with insulation having an
outer surface that is green with or without yellow stripes is
outer surface that is green with or without yellow stripes is
the grounding wire.
the grounding wire.
This product must be grounded. In the event of an electrical
This product must be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electrical shock
short circuit, grounding reduces the risk of electrical shock
by providing an escape wire for the electric current.
by providing an escape wire for the electric current.
This product is equipped with a cord having a grounding
This product is equipped with a cord having a grounding
wire with an appropriate grounding plug. The plug must be
wire with an appropriate grounding plug. The plug must be
plugged into an outlet that is properly installed and
plugged into an outlet that is properly installed and
grounded in accordance with the local codes and
grounded in accordance with the local codes and
ordinances.
ordinances.
This product is for use on a nominal 220-V circuit and has a
This product is for use on a nominal 220-V circuit and has a
grounding plug similar to the plug illustrated in sketch A.
grounding plug similar to the plug illustrated in sketch A.
Only connect the product to an outlet having the same
Only connect the product to an outlet having the same
configuration as the plug.
configuration as the plug.
Do not use an adapter with this product.
Do not use an adapter with this product.
SHOCK
SHOCK
