Before you start work with a spray gun, be
sure to have clean air and no moisture
particles of water/oil in order to achieve
satisfactory results. Addition of a water
filter or inline dessicant filter is suggested.
Attached Cup by gently screwing on clockwise hand tight.
Hose connection is 1/4”; a hose of the same size
will need to be attached to the Air Inlet Joint.
1)
Initially perform the following actions:
a. Use the spanner wrench to tighten the fluid
nozzle.
b. Install and tighten the paint cup.
c. Check air lines and fittings to ensure that they
are clean and damage free before connecting to
gun.
d. Flush gun thoroughly with cleaning fluid
2) Pattern Adjustment
Use the pattern (fan) adjustment knob on the left
side of the gun to obtain the desired fan pattern.
3) Air Volume Adjustment
Use the air volume adjustment knob to obtain the
desired fluid flow volume.
4) Fluid (paint) adjustment
Use the fluid control knob to obtain the desired
fluid flow volume.
ASSEMBLY
Summary of Contents for CAT-33000
Page 3: ...IMPORTANT INSTRUCTIONS...
Page 5: ...ADJUSTMENT...
