12
Customer Support: 1-866-409-4581
AIR COMPRESSOR
TROubLeShOOTING
ProbLem
PoSSIbLe cauSe
PoSSIbLe SoLutIonS
.
The compressor stopped and
does not start.
Overloaded because of motor overheating.
Check that the main voltage corresponds to
specifications. An extension cord that is too thin or
too long can cause a voltage drop and cause the
motor to overheat. Allow the motor to cool down.
use heavy duty extension cords. ensure that the
compressor is plugged into a socket as close as
possible to the consumer unit or fuse box.
Motor windings are burned out.
Contact Customer Support.
The motor does not start and
makes a humming noise.
Capacitor is burned out.
Replace starter capacitor.
The motor does not start or starts
slowly.
Low voltage supply to the motor.
Check that the main voltage corresponds to
specifications. An extension cord that is too thin or
too long can cause a voltage drop and cause the
motor to overheat. Allow the motor to cool down.
use heavy duty extension cords. ensure that the
compressor is plugged into a socket as close as
possible to the consumer unit or fuse box.
The compressor is noisy with
metallic clangs.
Compressor head gasket broken or
valve plate faulty.
Stop the compressor and contact the dealer.
.
Compressor worn or broken piston ring
Stop the compressor and contact the dealer.
Compressor worn or broken cylinder ring
Stop the compressor and contact the dealer.
.
.
