background image

 

      

HOVER MOWER OPERATOR’S MANUAL

 

 

Evergreen Turf Equipment 

• 1028 4

th

 St. SW, Bldg. A 

• Auburn, Washington 98001 • caltrimmer.com 

Page 5 

 

Safety Precautions & Training 

 

1.  Read all information contained in this manual and 

the engine manual carefully. Be thoroughly familiar 
with the controls and proper use of the equipment. 

2.  Never allow children to operate mower. 
3.  Never operate this unit when you are tired, ill or 

under the influence of alcohol, drugs or medication. 

4.  Never try to mow across excessively steep terrain. 

On inclines, keep the unit in front / below and 
maneuver in a pendulum motion.  

5.  Keep area of operation clear of all persons, 

particularly small children and pets. 

6.  Never operate the mower without proper guards / 

shields in place. 

7.  Thoroughly train anyone using the mower. Make 

sure all mower operators know the safety, operating 
and maintenance procedures. 

8.  Never leave the mower unattended with the engine 

running. 

9.  Mow only in daylight or in good artificial light. 
10.  Always be sure of your footing. Keep a firm hold on 

the handle and never run with the unit. 

11.  Do not operate mower when barefoot or wearing 

open sandals. Always wear substantial footwear, 
and pants or slacks that cover your legs when 
operating mower. 

12.  Material may ricochet back toward the operator. Do 

not operate over gravel surfaces.

 

Preparation & Inspection 

 

1.  Thoroughly inspect the area where mower is to be 

used, and remove all stones, sticks, wire, bones and 
other foreign objects which might be thrown. Never 
operate the unit over gravel. 

2.  Check fuel before starting engine. Do not fill 

gasoline tank indoors, or when engine is running. 
Wait until engine has been allowed to cool for 
several minutes. Clean off any spilled gasoline 
before starting engine. 

3.  Make the unit is on a flat level surface before 

starting engine. 

4.  Inspect the unit to verify the controls, safety switches 

and handles are assembled properly. Do not operate 
unless they are functioning properly.  

5.  If the machine should start to vibrate abnormally, 

stop the engine and check for the cause 
immediately. 
 

 

6.  Use care when loading or unloading the machine 

into a trailer or truck. 

7.  Never operate machine in an enclosed area. 
8.  Keep all nuts and bolts tight to be sure the 

equipment is in safe working condition. 

9.  Never tamper with safety devices. Check their 

proper operation regularly. 

10.  Keep machine free of grass, leaves, or other debris 

build-up 

– especially the recoil starter area of the 

engine. Clean up oil or fuel spillage and remove any 
fuel-soaked debris. Allow machine to cool before 
storing in an enclosed space. 

11.  Never make any adjustments or repairs with the 

engine running. Disconnect the spark plug wire to 
prevent unintended starting. 

12.  Do not change the engine throttle setting or over-

speed the engine. 

13.  Maintain or replace safety and instruction labels, as 

necessary. 

14.  If gasoline is spilled, do not attempt to start the 

engine but move the machine away from the area of 
spillage and avoid creating any source of ignition 
until the gasoline vapor has dissipated. 

15.  Before using, always visually inspect to see that the 

blade(s), bolts, and spacers are not worn or 
damaged. Replace a worn or damaged blade(s). 

16.  Stop the engine if the machine must be tilted for 

transportation when crossing surfaces other than 
grass, and when transporting the machine to and 
from the area to be mowed. 

 

Engine Operation 

 
IMPORTANT 

– THIS IS A 2-STROKE ENGINE THAT 

REQUIRES MIXED FUEL OF GASOLINE AND 2-
STROKE OIL FOMULATED FOR USE IN HIGH-
PERFORMANCE AIR-COOLED ENGINES. 
 
Review the complete 
operation and safety 
instructions provided 
in the Maruyama 
engine 

owner’s 

manual 

– which is 

included in the 
information packet of 
this unit.

  

 
Any service, warranty 
or replacement parts 
issues for the engine 
should be directed to 
Maruyama Authorized 
Service Dealers. More information can be found on 
their website at: 

Maruayama-us.com 

 

Summary of Contents for RC190-M800









Reviews: