REEL MOWER OPERATOR
’S MANUAL (RL205H/207H)
Evergreen Turf Equipment
, LLC • 1028 4
th
St. SW, Bldg. A
• Auburn, Washington 98001 • caltrimmer.com
Assembly & Set-up (continued)
4. Attach the cable clips to secure the throttle cable to
the upper and lower handles.
Note: some units may
require 1 or 2 cable clips depending on the cable
length.
5.
Attach the throttle cable wire to the engine’s throttle
control bracket as shown.
Briggs & Stratton 550 Engine
(
Note: the air filter
must be removed to gain access to the
connection area
)
Honda GX120 Engine (
Note: the air filter must be
removed to gain access to the connection area
)
NOTE: Before tightening the cable holder, push
the cable so the throttle control is in the slow
position as indicated on the engine.
6. Mount the grass catcher bail to the grass catcher.
Attach the bail ends to the grass catcher using the flat
washers and clevis pins provided
Note: The bail has slightly different lengths on
each side, so align with the engine hook to
determine the proper position. The grass catcher
bin has three sets of mounting holes for the bail
so an adjustment can be made according to the
expected load or weight.
The bottom of the grass catcher has 2 brackets
designed to rest on the caster bracket.
Key Components
The image below identifies key components of the
California Trimmer Mower so take the time to familiarize
yourself with them and their function.
