background image

 

REEL MOWER OPERATOR

’S MANUAL (RL205H/207H) 

Evergreen Turf Equipment

, LLC • 1028 4

th

 St. SW, Bldg. A 

• Auburn, Washington 98001 • caltrimmer.com

 

 

Safety Instructions 

The  following  safety  alert  symbols  are  use  in  these 
instructions in conjunction with important safety messages 
related to the operation of the unit and potential hazards. 
As  you  familiarize  yourself  with the  various  features  and 
functionality  of  this  mower,  please  take  note  of  the 
subjects  and  specific  instructions  that  include  these 
images

… 

 

WILL cause serious or fatal injury if the 

instructions are not followed.

 

 

 

…CAN cause serious or fatal injury if the instructions 
are not followed. 

 

Safety Labels 

On the unit itself, there are additional labels that identify 
important safety issues. The following one refers to the 
hazards of the cutting blades. 

 

 
The following labels identify important instructions related 
to the operation of the mower: 
 

 

 

 

Safety Precautions 

 

Understand the operation of all controls and learn 
how to stop the engine and mower quickly in case of 
emergency. Make sure the operator receives 
adequate instruction before operating this unit. 
When instructions refer to the left or right side, it 
means as standing at the normal operation position. 
 

Training  

 

1.  Read all information contained in this manual 

carefully. Be thoroughly familiar with the controls and 
proper use of the equipment. 

2.  Never allow children to operate mower. 
3.  Never try to mow across steep terrain.  
4.  Keep area of operation clear of all persons, 

particularly small children and pets. 

5.  Never operate the mower without proper guards / 

shields in place. 

6.  Thoroughly train anyone using the mower. Make sure 

all mower operators know the safety, operating and 
maintenance procedures. 

7.  Never leave the mower unattended with the engine 

running, especially while the blade is spinning. 
 

Preparation 

 

1.  Thoroughly inspect the area where mower is to be 

used, and remove all stones, sticks, wire, bones and 
other foreign objects which might be picked up and 
thrown. 

2.  Do not operate mower when barefoot or wearing open 

sandals. Always wear substantial foot wear, and pants 
or slacks that cover your legs when operating mower. 

3.  Check fuel before starting engine. Do not fill gasoline 

tank indoors, or when engine is running. Wait until 
engine has been allowed to cool for several minutes. 
Clean off any spilled gasoline before starting engine. 

4.  Disengage clutch drive before starting engine. 
5.  Do not use mower unless all guards are properly in 

place. 

6.  Mow only in daylight or in good artificial light. 
7.  Always be sure of your footing. Keep a firm hold on 

the handle and walk, don’t run. 

8.  Inspect the unit to verify the controls, safety switches 

and shields are attached and functioning properly. Do 
not operate unless they are functioning properly.  
 

Summary of Contents for RL205HC











Reviews: