34
Ver. 18/12/2020 | Calistair C300
Fig. 3
5) Pull the filter drawer forward on the metal
tab up to the stop (Fig. 2).
6) Remove filter (Fig. 3).
7) Place the filter in a plastic bag and seal it.
8) Place the new filter on the filter drawer
with the seal facing upwards.
Push in filter completely.
9) Push filter drawer into the housing up to
the stop.
10) Attach housing cover.
11) Tighten screws.
Device is ready for operation.
8.3 Change UVC fluorescent tubes
CAUTION
Burn due to hot surface.
Hot surfaces in operation due to heating.
‣
Let device cool down for at least 30 minutes before maintenance work.
NOTE
Contact with dusts.
If the filter is dirty, dust may be emitted.
‣
Wear protective gloves.
Fig. 2
Summary of Contents for C300
Page 2: ......
