User guide
R4000
MOBILE AIR HANDLING UNIT
Version: 2.4
Update: 06/2019
Page 6 / 21
1.4.9
Technical data
MODEL
R4000 mobile
Total height
1,905 mm
Width
705 mm
Depth
845 mm
Max. weight
280 kg
Power of the UV-C bulbs
95 W
Number of UV-C bulbs
8
Max. treatment air flow
4,000 m
3
/h
Estimated max. total power
2000 W
Electrical power supply
230 V AC (16 A)
2
OPERATION
The R4000 is designed to operate permanently to guarantee continuous treatment of pollutants and
guarantee a good level of air decontamination for people working in the room(s) treated.
Your R4000 unit is always commissioned by a qualified person trained by us.
All the verifications when the unit is unpacked and commissioned are carried out by qualified CALISTAIR
personnel or representatives and by your technical teams.
2.1
Installation
The appliance is delivered in perfect working order. It can be used either for simple, standalone
treatment or connected to an air handling system.
2.1.1
Connection to the network (ductable version)
The R4000 can be connected to air ducts via its supply kit or its return kit. In all cases, this type of
installation requires a prior study followed by a Design Qualification (DQ), an Installation Qualification (IQ)
and an Operational Qualification (OQ). It is used as a real air handling unit or as a terminal decontamination
unit. The screen can be removed and installed at the room entrance. The embedded PLC can manage positive
or negative pressures, maintain a differential pressure cascade, be controlled by a BMS, report critical or
non-critical alarms, etc.
•
Ensure there is sufficient room around the unit to allow maintenance of the internal components,
•
Install all the necessary measures (mastic, sealing tape, sealed connections, etc.) to ensure the
airtightness at all levels of the system: in the ducts, between the unit and the air handling system,
etc. For installation according to the standards, use a certified installer,
•
Wear Personal Protective Equipment to carry out any operations.
2.1.2
Recycling treatment
Your unit is configured to treat the air in your rooms autonomously by recirculation. No connection
to the air handling system is needed. To ensure effective treatment, ensure that:
•
The unit is placed in a position which is not in anyone’s way,
