PRECAUTIONS WHEN USING THE LED FIXTURE
Always ensure at least one light bar is connected to the fixture before switching on. The Zeus Pro has an
intelligent LED driver which will increase or decrease power to match the amount of light bars connected to
the system.
Always wait 20 – 30 minutes for the LED light bars to cool down.
INSPECTION, MAINTENANCE AND REPAIR
Disconnect the Calitek fixture from mains before performing any maintenance or repairs.
Do not connect or disconnect the LED fixture under load.
Do not open or disassemble the LED fixture, it contains no serviceable parts inside. Opening the LED fixture
can be dangerous and will void the warranty.
Always wait 20 – 30 minutes for the LED light bars to cool down.
Caution! Do not clean the LED fixture with detergents, abrasives or other aggressive substances.
Regularly check the LED fixture for dust or dirt build up. Clean if necessary. Contamination may cause
overheating and decreased performance.
Clean the outside of the LED fixture using a dry or damp cloth.
Regularly check the cables of the LED fixture to ensure it is undamaged.
STORAGE AND DISPOSAL
Store the Grizzly fixture in a dry and clean environment, with an ambient temperature of -25ºC to 55ºC.
The product must not be discarded as unsorted municipal waste but must be collected separately for the
purpose of treatment, recovery and environmentally sound disposal.
For more information on Calitek products visit www.calitek.fr
EN
DISTRIBUTED IN EUROPE BY :
32 Rue de la Regalle – ZI la Regalle
77181 COURTRY
Tél : 01 64 21 20 00 - Fax : 01 60 20 28 34
MADE IN PRC
Conforme aux directives CE appli-
cables
Complies with applicable EC directives
Utilisation en intérieur uniquement
Indoor use only
Les appareils électriques doivent être éli-
minés dans une structure de récupération
et de recyclage appropriée
Electrical appliances must be disposed of in an
appropriate collection and recycling structure
Produit électronique
Electronic product
ATTENTION, Danger électrique
(haute tension)
WARNING, Electrical hazard
(high voltage)
Luminaire adapté au montage direct
sur des surfaces normalement
inflammables
Luminaire suitable for direct mounting on
normally flammable surfaces
Summary of Contents for Grizzly 600
Page 1: ...FR EN...
Page 16: ......
